Tektronix MSO54, Programmer'S Manual

Page: 582 / 1026

Commands listed in alphabetical order
For dI by dt measurement, the parameter is “DIBYDT”.
For SOA measurement, the parameter is “SOAHITSCNT”.
For Line Ripple measurement, the parameters are “LRIPRMS” | “LRIPPKPK”.
For Switching Ripple measurement, the parameters are “SWRIPRMS” |
“SWRIPPKPK”.
For Cycle Period measurement, the parameters is “PRIOD”.
For Cycle Frequency measurement, the parameters is “FREQ”.
For Positive Duty Cycle measurement, the parameters is “PDUTY”.
For Negative Duty Cycle measurement, the parameters is “NDUTY”.
For Positive Pulse Width measurement, the parameters is “PPULSE”.
For Negative Pulse Width measurement, the parameters is “NPULSE”.
For Cycle Amplitude measurement, the parameters is “AMPL”.
For Cycle Peak–Peak measurement, the parameters is “PKPK”.
For Cycle Top measurement, the parameters is “HIGH”.
For Cycle Base measurement, the parameters is “LOW”.
For Cycle Max measurement, the parameters is “MAX”.
For Cycle Min measurement, the parameters is “MIN”.
Examples
POWer:POWer1:RESUlts:CURRentacq:PK2PK? “TONLoss”
might return
9.91E+37, indicating the peak-to-peak value of Ton Energy for all acquisitions.
POWer:POWer<x>:RESUlts:ALLAcqs:POPUlation? (Query Only)
This command queries the population (number of complete cycles) of all
acquisitions for the measurement parameter in the speci
fi ed power measurement
badge. The power measurement badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:RESUlts:ALLAcqs:POPUlation?
<QString>
2-566 MSO54, MSO56, MSO58, MSO58LP Programmer