![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778518.webp)
Commands listed in alphabetical order
MEASUrement:REFLevels:MODE
This command sets or queries how often reference levels are calculated.
Group
Measurement
Syntax
MEASUrement:REFLevels:MODE {LATCh|CONTinuous}
MEASUrement:REFLevels:MODE?
Arguments
LATCh
calculates reference levels only on the
fi
rst acquisition after a statistics
reset.
CONTinuous
calculates reference levels on every acquisition.
Examples
MEASUREMENT:REFLEVELS:MODE CONTINUOUS
calculates reference levels on
every acquisition.
MEASUREMENT:REFLEVELS:MODE
? might return
:MEASUREMENT:REFLEVELS:MODE LATCH
indicating reference levels are
calculated only on the
fi
rst acquisition after a statistics reset.
MEASUrement:REFLevels:PERCent:FALLHigh
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the high reference level of the falling edge
when the measurement's ref level method is set to percent.
Group
Measurement
Syntax
MEASUrement:REFLevels:PERCent:FALLHigh
<NR3>
MEASUrement:REFLevels:PERCent:FALLHigh?
Arguments
<NR3>
is the percentage used to calculate the high reference level of the falling
edge
Examples
MEASUrement:REFLevels:PERCent:FALLHigh 90
sets the high reference
level to 90%.
MEASUrement:REFLevels:PERCent:FALLHigh?
might return
:MEASUREMENT:REFLEVELS:PERCENT:FALLHIGH 80.0000
indicating the
high reference level is 80%.
2-502
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
