Commands listed in alphabetical order
Examples
DISplay:PLOTView1:ZOOM:XAXIS:TO 2.5
sets the end of the zoom x-axis
to 2.5 V.
DISplay:PLOTView3:ZOOM:XAXIS:TO?
might return
:DISPLAY:PLOTVIEW3:ZOOM:XAXIS:TO 2.2144883507508
indicating the end of the zoom x-axis is 2.21 V.
DISplay:PLOTView<x>:ZOOM:YAXIS:FROM
This command sets or queries the bottom value of the zoom y-axis in the speci
fi
ed
plot view.
Group
Zoom
Syntax
DISplay:PLOTView<x>:ZOOM:YAXIS:FROM <NR3>
DISplay:PLOTView<x>:ZOOM:YAXIS:FROM?
Arguments
<NR3>
is the bottom value of the zoom y-axis.
Examples
DISplay:PLOTView1:ZOOM:YAXIS:FROM -1.0E+20
sets the bottom value
of the zoom y-axis to -1E+20.
DISplay:PLOTView1:ZOOM:YAXIS:FROM?
might return
:DISPLAY:PLOTVIEW1:ZOOM:YAXIS:FROM -1.0E+21
indicating
the bottom value of the zoom y-axis is -1E+21.
DISplay:PLOTView<x>:ZOOM:YAXIS:TO
This command sets or queries the top value of the zoom y-axis in the speci
fi
ed
plot view.
Group
Zoom
Syntax
DISplay:PLOTView<x>:ZOOM:YAXIS:TO
<NR3>
DISplay:PLOTView<x>:ZOOM:YAXIS:TO?
Arguments
<NR3>
is the top value of the zoom y-axis.
Examples
DISplay:PLOTView1:ZOOM:YAXIS:TO 100
sets the top value of the zoom
y-axis to 100.
2-262
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
