Command groups
Table 2-32: Miscellaneous commands (cont.)
Command
Description
Causes the interface to pause the speci
fi
ed number of seconds before processing
any other commands.
Speci
fi
es a comment which is ignored by the instrument.
Selects or queries the selected source for the time base reference oscillator.
Returns whether the time base reference oscillator is locked.
Returns a listing of instrument settings.
Enables or disables the socket server which supports a telnet or other TCPIP socket
connection to send commands and queries to the instrument.
Sets the TCPIP port for the socket server connection.
Sets or queries the protocol for the socket server.
Initializes both waveform and setup memories.
Queries the time displayed by the instrument.
Sets the time zone to the one speci
fi
ed.
Sets or queries the time zone using the difference between the desired time zone
and UTC.
Returns the total number of hours the oscilloscope has been turned on since the NV
memory was last programmed.
Sets or queries the enabled state of the touch screen.
Performs the group execute trigger (GET).
Tests the interface and returns status.
Reverts the scope settings to a state before the previous command or user interface
action.
Unlocks front panel.
Used to con
fi
gure the rear USB port to be off or enabled as a USBTMC device.
Sets or queries the verbose state.
2-54
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
