![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778327.webp)
Commands listed in alphabetical order
DISplay:WAVEView<x>:ZOOM:ZOOM<x>? (Query Only)
This query returns the zoom parameters of the speci
fi
ed zoom in the speci
fi
ed
waveview. <x> must be 1.
NOTE.
WAVEView<x>
is the speci
fi
ed waveview and must be
WAVEView1
.
ZOOM<x>
is the speci
fi
ed zoom and must be
ZOOM1
.
Group
Zoom
Syntax
DISplay:WAVEView<x>:ZOOM:ZOOM<x>?
Returns
Returns the zoom parameters of the speci
fi
ed zoom in the speci
fi
ed waveview.
Examples
DISplay:WAVEView1:ZOOM:ZOOM1?
might return
:DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:SCALE
2.5000;POSITION 70.0000;WINSCALE
400.0000E-9;:DISPLAY:WAVEVIEW1:ZOOM:ZOOM 1:VERTICAL:SCALE
3.8000;POSITION 2.5951;:DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:STATE 0
.
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:HORizontal:POSition
Sets or queries the horizontal zoom position (of the speci
fi
ed zoom in the speci
fi
ed
waveview) of the zoomed waveform or zoom waveform in the display, around
which the zoom waveform displays. It is freely movable around the acquisition
settings (horizontal span). An acquired waveform or reference could extend off
screen. The valid zoom area does not care about the waveform itself, only the user
setting for acquisition.
For example, if horizontal scale is set to 1 second, position to 50, then the
acquisition area will go from -5 s to +5 s. Zoom window 0 will focus on -5 s
and zoom area 100 will focus on +5 s. If the instrument is stopped and the scale
changed to 0.5 s, there will be data off the ends of the display. However, 0% zoom
will put the user focus on -2.5 s, the lower bound of the acquisition span.
NOTE.
WAVEView<x>
is the speci
fi
ed waveview and must be
WAVEView1
.
ZOOM<x>
is the speci
fi
ed zoom and must be
ZOOM1
.
Group
Zoom
MSO54, MSO56, MSO58, MSO58LP Programmer
2-311
Summary of Contents for MSO54
