Tektronix MSO54, Programmer'S Manual

Page: 546 / 1026

Commands listed in alphabetical order
MATH<x>
= A math waveform speci fi er; <x> is ≥ 1.
REF<x>
= A reference waveform speci fi er; <x> is ≥ 1.
Examples
POWer:POWer1:CYCAmp:INPUTSOurce CH1
sets the input source for cycle
amplitude measurement as CH1 for the power measurement badge Power 1.
POWer:POWer<x>:CYCLEBase:INPUTSOurce
This command sets or queries the input source for cycle base measurement in the
speci
fi ed power measurement badge. The power measurement badge is speci fi ed
by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:CYCLEBase:INPUTSOurce
{CH<x> | MATH<x> | REF<x>}
POWer:POWer<x>:CYCLEBase:INPUTSOurce?
Arguments
CH<x>
= A channel speci fi er; <x> is 1 through 8 and is limited by the number
of FlexChannels in your instrument.
MATH<x>
= A math waveform speci fi er; <x> is ≥ 1.
REF<x>
= A reference waveform speci fi er; <x> is ≥ 1.
Examples
POWer:POWer1:CYCLEBase:INPUTSOurce CH2
sets the input source for cycle
base measurement as CH2 for the power measurement badge Power 1.
POWer:POWer<x>:CYCLEMAX:INPUTSOurce
This command sets or queries the input source for cycle maximum measurement
in the speci
fi ed power measurement badge. The power measurement badge
is speci fi ed by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
2-530 MSO54, MSO56, MSO58, MSO58LP Programmer