Tektronix MSO54, Programmer'S Manual

Page: 719 / 1026

Commands listed in alphabetical order
Arguments
<QString>
speci fi es the data value in the speci fi ed valid format (binary,
hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X;
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE "XXXXX111"
sets
the data value for USB bus trigger search 1 to "XXXXX111" in binary format.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE "11"
, indicating
that the data value for USB bus trigger search 1 is set to "11" in hexadecimal
format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet
This command sets the byte offset to look for a data pattern at, in bytes, to be used
when searching on a USB bus signal. The search number is speci
fi ed by <x>. The
search condition must be set to DATA.
Conditions Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet <NR1>
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
Arguments
<NR1>
speci fi es the data offset in bytes.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:OFFSET 5
sets the data offset
for USB bus trigger search 1 to 5 bytes.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:OFFSET?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:OFFSET DONTCARE
,
indicating that the data offset for USB bus trigger search 1 is set to DONTCare.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALi fi er
This command sets or queries the quali fi er to be used when searching on a USB
bus signal. The search condition must be set to IDANDDATA OR DATA. The
search number is speci
fi ed by <x>.
Conditions Requires the SR-USB2 Serial Triggering and Analysis Application.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-703