Commands listed in alphabetical order
MEASUrement:MEAS<x>:PATTERNTYPe
This command sets or queries the pattern type for the measurement. Measurements
are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:PATTERNTYPe {REPeating|ARBitrary}
MEASUrement:MEAS<x>:PATTERNTYPe?
Arguments
REPeating
speci
fi
es a repeating pattern.
ARBitrary
speci
fi
es an arbitrary pattern.
Examples
MEASUrement:MEAS1:PATTERNTYPe ARBITRARY
speci
fi
es an arbitrary pattern.
MEASUrement:MEAS1:PATTERNTYPe?
might return
:MEASUREMENT:MEAS1:PATTERNTYPE REPEATING
indicating a repeating
pattern.
MEASUrement:MEAS<x>:PERFREQ:EDGE
This command sets or queries the edge type of a Period/Frequency measurement.
The measurement number is speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:PERFREQ:EDGE {FIRST|RISE|FALL}
Arguments
FIRST
computes the measurement between Rising edges if the
fi
rst edge is Rising.
Computes the measurement between Falling edges if the
fi
rst edge is Falling.
RISE
computes the measurement between Rising edges.
FALL
computes the measurement between Falling edges.
Examples
MEASUrement:MEAS1:PERFREQ:EDGE RISE
speci
fi
es computing the
measurement between Rising edges.
measurement:meas1:perfreq:edge?
might return
:MEASUREMENT:MEAS1:PERFREQ:EDGE FIRST
if the measurement
is computed between edges of the
fi
rst type edge found.
2-466
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
