![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778433.webp)
Commands listed in alphabetical order
MEASUrement:MATH2:REFLevels:PERCent:FALLLow?
might return
:MEASUREMENT:MATH2:REFLEVELS:PERCENT:FALLLOW 10.0000
indicating
the reference level is set to 10% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:FALLMid
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the mid reference level of the falling
edge when the measurement ref level method is set to percent. The math number
is speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MATH<x>:REFLevels:PERCent:FALLMid <NR3>
MEASUrement:MATH<x>:REFLevels:PERCent:FALLMid?
Arguments
<NR3>
is the percentage (where 50% is equal to MID) used to calculate the mid
reference level when the measurement Ref level method is set to Percent.
Examples
MEASUrement:MATH2:REFLevels:PERCent:FALLMid 50
sets the reference
level to 50% of TOP.
MEASUrement:MATH2:REFLevels:PERCent:FALLMid?
might return
:MEASUREMENT:MATH2:REFLEVELS:PERCENT:FALLMID 50.0000
indicating
the reference level is set to 50% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:HYSTeresis
This command sets or queries the percentage (where 100% is equal to MAX
and 0% is equal to MIN) used to calculate the hysteresis of the reference level
when the measurement ref level method is set to percent. The math number is
speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MATH<x>:REFLevels:PERCent:HYSTeresis <NR3>
MEASUrement:MATH<x>:REFLevels:PERCent:HYSTeresis?
Arguments
<NR3>
is the hysteresis value used for the autoset.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-417
Summary of Contents for MSO54
