![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778129.webp)
Commands listed in alphabetical order
Syntax
AUXout:EDGE {RISing|FALling}
AUXout:EDGE?
Arguments
RISing
sets the polarity to the rising edge.
FALling
sets the polarity to the falling edge.
Examples
AUXOUT:EDGE RISING
sets the polarity to rising edge.
AUXOUT:EDGE?
might return
:AUXOUT:EDGE FALLING
, indicating that the
polarity is set to falling edge.
AUXout:SOUrce
This command sets or queries the source at the Auxiliary Output BNC connection.
Group
Miscellaneous
Syntax
AUXout:SOUrce {ATRIGger|REFOUT|AFG}
AUXout:SOUrce?
Arguments
ATRIGger
sets the source at the BNC connector to the main trigger.
REFOUT
sets the source at the BNC connector to the reference output.
AFG
sets the source at the BNC connector to the AFG output.
Examples
AUXOUT:SOURCE?
might return
:AUXOUT:SOURCE ATRIGGER
, indicating that
the source at the BNC connector is set to the A trigger.
BUS:ADDNew (No Query Form)
This command adds the speci
fi
ed bus. This command creates/adds the bus but
does not display it (turn it on). In order to enable bus decoding and see the bus
display on screen, send the
DISplay:WAVEView<x>:BUS:B<x>:STATE
ON
command.
Group
Bus
Syntax
BUS:ADDNew <QString>
MSO54, MSO56, MSO58, MSO58LP Programmer
2-113
Summary of Contents for MSO54
