Tektronix MSO54, Programmer'S Manual

Page: 298 / 1026

Commands listed in alphabetical order
Syntax
DISplay:VARpersist <NR3>
DISplay:VARpersist?
Related Commands DISplay:PERSistence
Arguments
<NR3>
indicates the persistence decay time and ranges from 0.5 to 100.
Examples
DISPLAY:VARPERSIST 5
sets the persistence decay time to 5.
DISPLAY:VARPERSIST?
might return
:DISPLAY:VARPERSIST 3.0000E-01
,
indicating that persistence decay time is currently set to 0.300.
DISplay:WAVEView<x>:BUS:B<x>:STATE
Sets or queries the state of the speci fi ed bus in the speci fi ed waveview.
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
Group
Display Control
Syntax
DISplay:WAVEView<x>:BUS:B<x>:STATE {OFF|ON|0|1}
DISplay:WAVEView<x>:BUS:B<x>:STATE?
Arguments
0
turns speci fi ed bus off.
1
turns the speci fi ed bus on.
ON
turns the speci fi ed bus on.
OFF
turns speci fi ed bus off.
Examples
DISplay:WAVEView1:BUS:B1:STATE OFF
turns speci fi ed bus off.
DISplay:WAVEView1:BUS:B1:STATE?
might return
:DISPLAY:WAVEVIEW1:BUS:B1:STATE 1
indicating the speci fi ed bus is on.
DISplay:WAVEView<x>:BUS:B<x>:VERTical:POSition
Sets or queries the vertical position of the speci fi ed bus in the speci fi ed waveview.
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
2-282 MSO54, MSO56, MSO58, MSO58LP Programmer