![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778528.webp)
Commands listed in alphabetical order
Arguments
PERCent
speci
fi
es that the reference levels are calculated as a percent
relative to HIGH and LOW. The percentages are de
fi
ned using the
MEASUrement:REF<x>:REFLevel:PERCent
commands.
ABSolute
speci
fi
es that the reference levels are set explicitly using the
MEASUrement:REF<x>:REFLevel:ABSolute
commands. This method is
useful when precise values are required.
Examples
MEASUrement:REF1:REFLevels:METHod ABSOLUTE
speci
fi
es that the
reference levels are set explicitly.
MEASUrement:REF1:REFLevels:METHod?
might return
:MEASUREMENT:REF1:REFLEVELS:METHOD PERCENT
indicating the
reference levels are calculated as a percent relative to HIGH and LOW.
MEASUrement:REF<x>:REFLevels:PERCent:FALLHigh
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the high reference level of the falling edge
when the measurement's ref level method is set to percent.
Group
Measurement
Syntax
MEASUrement:REF<x>:REFLevels:PERCent:FALLHigh
<NR3>
MEASUrement:REF<x>:REFLevels:PERCent:FALLHigh?
Arguments
<NR3>
is the percentage used to calculate the high reference level of the falling
edge
Examples
MEASUrement:REF1:REFLevels:PERCent:FALLHigh 95
sets the reference
level to 95%.
MEASUrement:REF1:REFLevels:PERCent:FALLHigh?
might return
:MEASUREMENT:REF1:REFLEVELS:PERCENT:FALLHIGH 90.0000
indicating
the reference level is 90%.
MEASUrement:REF<x>:REFLevels:PERCent:FALLLow
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the low reference level of the falling edge
when the measurement's ref level method is set to percent.
2-512
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
