![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778434.webp)
Commands listed in alphabetical order
Examples
MEASUrement:MATH2:REFLevels:PERCent:HYSTeresis 2.5
sets the
hysteresis to 2.5% of MAX
MEASUrement:MATH2:REFLevels:PERCent:HYSTeresis?
might return
:MEASUREMENT:MATH2:REFLEVELS:PERCENT:HYSTERESIS 5.0000
indicating the hysteresis is set to 5% of MAX.
MEASUrement:MATH<x>:REFLevels:PERCent:RISEHigh
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the high reference level of the rising edge
when the measurement ref level method is set to percent. The math number is
speci
fi
ed by x. The measurement number is speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MATH<x>:REFLevels:PERCent:RISEHigh <NR3>
MEASUrement:MATH<x>:REFLevels:PERCent:RISEHigh?
Arguments
<NR3>
is the percentage (where 100% is equal to TOP) used to calculate the high
reference level when the measurement's Ref level method is set to Percent.
Examples
MEASUrement:MATH2:REFLevels:PERCent:RISEHigh 95
sets the reference
level to 95% of TOP.
MEASUrement:MATH2:REFLevels:PERCent:RISEHigh?
might return
:MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISEHIGH 90.0000
indicating the reference level is set to 90% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:RISELow
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the low reference level of the rising edge
when the measurement ref level method is set to percent. The math number is
speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MATH<x>:REFLevels:PERCent:RISELow <NR3>
MEASUrement:MATH<x>:REFLevels:PERCent:RISELow?
2-418
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
