Tektronix MSO54, Programmer'S Manual

Page: 730 / 1026

Commands listed in alphabetical order
Arguments
RISe
speci fi es a rising edge.
FALL
speci fi es a falling edge.
EITher
speci fi es either rising or falling edge.
Examples
SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPE RISE
sets the slope for search
1 to rise.
SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPE?
might return
:SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPE RISE
, indicating that the slope
for the trigger for search 1 is rise.
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce
This command sets or queries the source waveform for an edge trigger search to
determine where to place a mark. The search number is speci
fi ed by <x>.
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce
{CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
Arguments
CH<x>
speci fi es one input channel as the edge source, where the channel number
is speci fi ed by <x>.
CH<x>_D<x>
speci fi es a digital reference waveform as the source waveform
for the speci fi ed search.
MATH<x>
speci fi es the math waveform as the search source, where the math
number is speci fi ed by <x>.
REF<x>
speci fi es the reference waveform as the search source, where the
reference number is speci fi ed by <x>.
REF<x>_D<x>
speci fi es a digital reference waveform as the source waveform
for the speci fi ed search.
Examples
SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCE CH2
sets the source waveform
for the A trigger to Channel 2.
SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCE?
might return
:SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCE CH2
, indicating that the
Channel 2 edge trigger is the source for search 1.
2-714 MSO54, MSO56, MSO58, MSO58LP Programmer