Tektronix MSO54, Programmer'S Manual

Page: 854 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:USB:DATa:QUALi fi er
This command sets the quali fi er to be used when triggering on a USB bus signal.
The trigger condition must be set to DATAPACKET. The bus number is speci fi ed
by <x>.
Conditions Requires the SR-USB2 Serial Triggering and Analysis Application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:USB:DATa:QUALifier {EQual|UNEQual|
LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:USB:DATa:QUALifier?
Arguments
EQUal
speci fi es the quali fi er as Equal.
INrange
speci fi es the quali fi er as Inside Range.
LESSEQual
speci fi es the quali fi er as Less Than or Equal to.
MOREEQual
speci fi es the quali fi er as More Than or Equal to.
OUTrange
speci fi es the quali fi er as Out of Range.
UNEQual
speci fi es the quali fi er as Not Equal to.
LESSthan
speci fi es the quali fi er as Less Than.
MOREthan
speci fi es the quali fi er as More Than.
Examples
TRIGger:A:BUS:B1:USB:DATa:QUALifier LESSTHAN
sets the quali fi er to
less than.
TRIGger:A:BUS:B1:USB:DATa:QUALifier?
might return
:TRIGGER:A:BUS:B1:USB:DATA:QUALIFIER EQUAL
indicating the quali fi er
is set to equal.
TRIGger:{A|B}:BUS:B<x>:USB:DATa:SIZe
This command speci fi es the number of contiguous data bytes to trigger on. The
bus number is speci fi ed by <x>.
Conditions Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Trigger
2-838 MSO54, MSO56, MSO58, MSO58LP Programmer