Tektronix MSO54, Programmer'S Manual

Page: 789 / 1026

Commands listed in alphabetical order
If the CAN standard is set for ISO CAN FD or Non-ISO CAN FD, and the trigger
data size is set to 8, the maximum value for the data offset will be 56 (64 - 8 = 56).
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:QUALi fi er
This command sets the quali fi er (<, >, =, ≠ , ≤ , ≥ ) to be used when triggering
on a CAN bus signal. The trigger condition must be set to IDANDDATA or
DATa (using
TRIGger:{A|B}:BUS:B<x>:CAN:CONDition ). The bus number is
speci fi ed by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:QUALifier
{LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:QUALifier?
Arguments
LESSthan
sets the oscilloscope to trigger when the data is less than the quali fi er
value.
MOREthan
sets the oscilloscope to trigger when the data is greater than the
quali fi er value.
EQual
sets the oscilloscope to trigger when the data is equal to the quali fi er value.
UNEQual
sets the oscilloscope to trigger when the data is not equal to the quali fi er
value.
LESSEQual
sets the oscilloscope to trigger when the data is less than or equal
to the quali fi er value.
MOREEQual
sets the oscilloscope to trigger when the data is greater than or equal
to the quali fi er value.
Examples
TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER LESSTHAN
sets the oscilloscope
to trigger when the data is less than the quali fi er value.
TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER?
might return
:TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER LESSTHAN
, indicating that the
oscilloscope is set to trigger when the data is less than the quali fi er value.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-773