![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778202.webp)
Commands listed in alphabetical order
Group
Calibration
Syntax
CALibrate?
Examples
CALIBRATE?
might return
:CALIBRATE:INTERNAL:STATUS PASS
, indicating
the calibration status.
CALibrate:INTERNal (No Query Form)
This command (no query form) starts the signal path calibration (SPC) of the
instrument. You can use the
query to return the
current status of the signal path calibration of the instrument.
NOTE.
When running SPC through the remote interface, calibration status cannot
be obtained until after the SPC completes. SPC takes approximately 5 minutes per
channel which means a total of 40 minutes on an 8-channel model. Any remote
command that performs an action on the oscilloscope is also disabled until the
SPC is complete.
Group
Calibration
Syntax
CALibrate:INTERNal
Related Commands
Examples
CALIBRATE:INTERNAL
starts the signal path calibration of the instrument.
CALibrate:INTERNal:STARt (No Query Form)
This command (no query form) starts the signal path calibration (SPC) of the
analog channels. This command is the same as the
command. You can use the
query to return the
current status of the signal path calibration of the instrument.
NOTE.
When running SPC through the remote interface, calibration status cannot
be obtained until after the SPC completes. SPC takes approximately 5 minutes per
channel which means a total of 40 minutes on an 8-channel model. Any remote
command that performs an action on the oscilloscope is also disabled until the
SPC is complete.
2-186
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
