Tektronix MSO54, Programmer'S Manual

Page: 897 / 1026

Commands listed in alphabetical order
TRIGGER:B:RESET:EDGE:SLOPE
? might return
:
TRIGGER:B:RESET:EDGE:SLOPE RISE
indicating the instrument is set to reset
the trigger on the rising or positive edge of a signal.
TRIGger:B:RESET:EDGE:SOUrce
This command sets or queries the trigger source for the A → B sequential edge
trigger reset feature.
Group Trigger
Syntax
TRIGger:B:RESET:EDGE:SOUrce {CH<x>|CH<x>_D<y>}
TRIGger:B:RESET:EDGE:SOUrce?
Arguments
The source channel for the trigger reset.
Examples
TRIGGER:B:RESET:EDGE:SOURCE CH4
sets Channel 4 as the input source for
the trigger reset.
TRIGGER:B:RESET:EDGE:SOURCE?
might return
:TRIGGER:B:RESET:EDGE:SOURCE CH1
, indicating that the current input
source for the trigger reset is Channel 1.
TRIGger:B:RESET:TIMEOut:TIMe
This command sets or queries the reset timer for a sequential timeout trigger reset.
Group
Trigger
Syntax
TRIGger:B:RESET:TIMEOut:TIMe <NR3>
TRIGger:B:RESET:TIMEOut:TIMe?
Arguments
<NR3>
is the reset timer for a sequential timeout trigger reset.
Examples
TRIGGER:B:RESET:TIMEOUT:TIME
100e-9 sets the time to 100 ns.
TRIGGER:B:RESET:TIMEOUT:TIME
? might return
:TRIGGER:B:RESET:TIMEOUT:TIME 20.0E-9 indicating the timeout time
is set to 20 ns.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-881