Recommended Accessories
Null Modem
Crossover Cable
–
for DTE to DTE connection
Model# 232NM9
DIN Rail Mounting Kit
– 35mm
Model# DRAD35
Document Number: 710-10571-00_r1_VESP211x_0418qsg
1-888-948-2248 |
Europe:
+353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: [email protected]
Before you begin, make
sure you have
the following:
Models: VESP211, VESP211-232,
VESP211-485
Ultra Compact
Ethernet to Serial Servers
Fast and easy on the web:
www.advantech-bb.com
+
VESP211x product
+
CD - with Software and Manuals
+
Power Supply
+
Additional items, not included:
+Ethernet cable(s)
+Null modem cable(s)
+Mounting accessories kit
QUICK START
GUIDE
The primary check for correct operation is the
device LEDs.
For advanced set up information, see the “HELP”
section on the right hand side of each page within
the Vlinx Manager.
Select Diagnostic for a check of communications
status with attached VESP211x device, and then
select the device for which the communications
check is desired. A report of reply times and ping
statistics is generated and can be saved.
Note: you can also send your configuration files to
B+B SmartWorx Technical Support for review.
Reset Mode Switch
Mode Switch Action
Result
Press and Hold in for
0-2 seconds.
Resets the unit.
Press and Hold in for
2-10 seconds.
Puts unit in Console Mode.
The Ready LED turns OFF and
the Serial LED turn On Solid.
Press and Hold in for
more than 10 seconds.
Reloads Factory Defaults.
Both Serial and Ready LEDs
turn On Solid.
Troubleshooting
6
