Tektronix MSO54, Programmer'S Manual

Page: 781 / 1026

Commands listed in alphabetical order
Arguments
<QString>
is the label value.
Examples
TRIGGER:A:BUS:B1:ARINC429A:SDI:VALUE "X0"
sets the value to X0.
TRIGGER:A:BUS:B1:ARINC429A:SDI:VALUE?
might return "XX", indicating
that the value is XX.
TRIGger:{A|B}:BUS:B<x>:ARINC429A:SSM:VALue
This command sets or queries the label value when triggering on an ARINC429
SSM
fi eld. The bus number is speci fi ed by x. The trigger condition must be
set to DATa or LABELANDDATA, and the data format must be set to DATA
or SDIDATA.
Conditions Requires the SR-AERO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:ARINC429A:SSM:VALue
<QString>
TRIGger:{A|B}:BUS:B<x>:ARINC429A:SSM:VALue?
Arguments
<QString>
is the label value.
NOTE.
The SSM fi eld is only present when the selected data fi eld format is DATA
or SDIDATA (using
BUS:B<x>:ARINC429A:DATAFORmat
). Also, the stored
QString is reset to its default value whenever the data fi eld format is changed.
Examples
TRIGGER:A:BUS:B1:ARINC429A:SSM:VALUE "X0"
sets the value to X0.
TRIGGER:A:BUS:B1:ARINC429A:SSM:VALUE?
might return "XX", indicating
that the value is XX.
TRIGger:{A|B}:BUS:B<x>:AUDio:CONDition
This command sets the condition (word select, start of frame, or matching data)
to be used when triggering on an audio bus signal. The bus number is speci
fi ed
by <x>.
Conditions Requires the SR-AUDIO Triggering and Analysis application.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-765