Express5800/T110i
2nd
Edition,
Aug
2018
Be sure to read this guide carefully before using this
server and keep this guide for future use.
Read and follow
Safety Precautions and Regulatory Notices
that comes with this product first.
The following describes the procedures from opening the carton box to
starting using this product. Be sure to follow these steps.
Step 1
Check the accessories
Open the carton box, and then make sure you have all the accessories listed below:
●
Express5800/T110i server × 1
●
Getting Started (this guide) × 1
●
Safety Precautions and Regulatory Notices × 1
●
SDR Update CD-ROM × 1
●
Screw for backup device × 8
●
Power cord × 1 or × 2*
●
Cable ties (for securing AC power cord) × 1 or × 2*
●
Bezel lock key × 2
Important: Keep accessories for future use.
* EXP334A only
Step 2
Install internal optional devices
Install internal optional devices. Go to Step 3 if you have not purchased optional
devices or if you purchased a Build to Order (BTO) product.
Note: See “Installing Internal Optional Devices” in
User’s Guide
and the manual that comes with
the optional device.
Step 3
Place the server to a proper location
Determine the location to place this product.
Note: See “Installation and Connection” in
User’s Guide
.
Installing the stabilizer
Remove the two screws from the stabilizer to remove the stabilizer from the server. Turn the stabilizer 90
degree as shown in the figure below, and then fix it by using the two screws. For details, see “Preparation for
installation” in
User’s Guide
.
Step 4
Connect cables
Connect cables to the server.
Note: See “Installation and Connection” in
User’s Guide
.
* The type of power supply unit depends on the type of system.
This figure shows the fixed power supply model.
Getting Started!
Environment:
<Oper
a
ting>
Am
b
ient temper
a
t
u
re:5°C to 40°C
*
1
H
u
midity: 10% to
8
5%
*
2
Temper
a
t
u
re gr
a
dient: ±10°C/ho
u
r
Air pre
ssu
re: 749 to 1040 hp
a
<Non-oper
a
tion>
Am
b
ient temper
a
t
u
re: 5°C to 40°C
*
1
H
u
midity: 10% to
8
5%
*
2
Temper
a
t
u
re gr
a
dient: ±15°C/ho
u
r
Air pre
ssu
re: 749 to 1040 hp
a
At le
as
t 150 mm cle
a
r
a
nce in
front of/
b
ehind the
s
erver
C
ab
le
s
for the mo
us
e or other
device
s
a
re within e
as
y re
a
ch
Cle
a
n
a
nd orderly room
Fl
a
t
a
nd
s
t
u
rdy de
s
k
100/200VAC
b
ipol
a
r gro
u
nded
o
u
tlet or
b
ipol
a
r o
u
tlet with
gro
u
nd termin
a
l (
s
ep
a
r
a
te
a
d
a
pter i
s
req
u
ired)
*
1: 5°C to 4
8
°C (when
a
n option
a
l
kit i
s
in
s
t
a
lled;
sub
ject to
compo
s
ition re
s
triction
s
)
*
2: 10% to
8
0% (when intern
a
l
LTO i
s
in
s
t
a
lled)
Instruction Manuals
Instruction manuals are available at NEC Web Site (http://www.nec.com/).
To see the manuals in EXPRESSBUILDER, follow the steps below.
(1) If you already have the EXPRESSBUILDER DVD, set the DVD into a computer
running Windows. Follow the on-screen messages to start the menu, and then go
to (4).
Tips: You can download EXPRESSBUILDER from NEC Web Site.
(2) To install Windows, follow this guide (reverse side).
(3) After installing Windows, click
NEC EXPRESSBUILDER
on the desktop or Start
Menu.
(4) Click
Instruction Manuals
on the following menu.
<Front view>
Display unit
Connect the provided
power cord to an outlet
when the cable
connection is complete.
A device with
serial interface
(such as a
modem)
Hub/Switching hub
USB devices
USB devices
(such as a
terminal
adapter)
<Rear view>*
