background image

Welcome. . .

Thank you for buying an
IBM xSeries server.

This server
contains information for setting
up and configuring your server.

For detailed information
about your server, view the

on the

You can also find the most
current information about your
server on the IBM Web site at:
http://www.ibm.com/pc/support

Installation Guide

User's Reference

Documentation CD.

Go to the Server Support

flow chart

Cable the server

and options

Start the server

Install options:
• Drives
• Microprocessors
• Adapters
• Memory

Did the server

start correctly?

Yes

No

Use ServerGuide™

to setup and

configure hardware

Did configuration

complete?

Use

ServerGuide to

install operating

system?

Use ServerGuide to
install applications,
such as IBM systems
management software
and IBM ServeRAID
programs

System is ready to use.

Go to the Server Support

flow chart to register

and profile your server.

Go to the Web for Instructions,
http://www.ibm.com/pc/support

No

Yes

Yes

No

Installation Guide

Install the server in

the rack, if required

xSeries 350

®

 

Summary of Contents for eserver xSeries 350































































Reviews: