CM4008 Quick Start (520005-Rev 3.2)
Page 1
CM4008
Quick Start Guide
Thank you for purchasing the CM4008 console server. This Quick Start walks you through
installation, configuration and local operation. For more details please refer to the
User
Manual
on the CDROM.
Step1
Check kit contents
CM4008
console server
UTP cables (2) and DB9F-RJ45S
straight and cross-over
Quick Start &
CDROM
5VDC IEC power
supply and cable
Step 2
Connect the hardware
Plug the power supply into the AC mains and connect the DC power cable to the
5VDC
power socket on the CM4008
Connect the CM4008
LAN
port to your network, connect your serial console
devices to the CM4008 serial
PORTS
1-8.
Note:
If you plan to use out-of-band (OoB) dial-in access, connect an external
modem to the
LOCAL
port.
Step 3
Set up the console server
The default console server IP address is
192.168.0.1
(subnet mask
255.255.255.0
).
With a web browser on any computer that is LAN connected to the console server:
Enter
https://192.168.0.1
into the address bar
