Tektronix MSO54, Programmer'S Manual

Page: 338 / 1026

Commands listed in alphabetical order
NOTE.
Setting the DESER and the ESER to the same values allows only those
codes to be entered into the Event Queue and summarized on the ESB bit (bit 5) of
the Status Byte Register. Use the
DESE command to set the DESER.
Examples
*ESE 209
sets the ESER to binary 11010001, which enables the PON, URQ,
EXE, and OPC bits.
*ESE?
might return 186, showing that the ESER contains DESE the binary
value 10111010.
*ESR? (Query Only)
This query-only command returns the contents of the Standard Event Status
Register (SESR). *ESR? also clears the SESR (since reading the SESR clears it).
For a more detailed discussion of the use of these registers, see Registers.
Group Status and Error
Syntax
*ESR?
Related Commands
ALLEv? , *CLS , DESE , *ESE , EVENT? , EVMsg? , *SRE , *STB?
Examples
*ESR?
might return
*ESR 213
, showing that the SESR contains the binary
value 11010101.
ETHERnet:DHCPbootp
This command sets the network con fi guration method to DHCP (that is ON) or
static IP address (that is OFF).
Group Ethernet
Syntax
ETHERnet:DHCPbootp {ON|OFF}
ETHERnet:DHCPbootp?
Arguments
ON
enables the oscilloscope to search the network for a DHCP server in order to
automatically assign a dynamic IP address to the oscilloscope.
2-322 MSO54, MSO56, MSO58, MSO58LP Programmer