Stratasys uPrint, Service Manual, Page: 90 / 383

uPrint/uPrint SE Service Manual 4-43
Figure 4-72: Removing the circuit breaker
Installing the circuit breaker
1.
Push the circuit breaker through the electronics bay panel until it locks in place.
2.
Reconnect the CB1 and CB2 spade connectors to the circuit breaker.
3.
Reconnect the Load and CB1 spade connectors to the circuit breaker.
4.
Close the electronics bay. See Closing the electronics bay on page 4-16.
Press tabs and push
the circuit breaker
through the panel