Stratasys uPrint, Service Manual, Page: 192 / 383

uPrint/uPrint SE Service Manual 4-145
Thermal Fuses
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
Hardware
• 10-32 x
3
⁄
8
” slotted screws (x8)
• 4-40 x
1
⁄
4
” slotted screws (x4)
Removing the right side thermal fuse
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 4 mounting screws and
remove the right side heater panel. See Figure 4-252.
Figure 4-252: Right side heater panel mounting screw locations
4.
Disconnect the RTH1 and RTH2 spade connectors by pulling outward. See Figure 4-253.
Figure 4-253: RTH1 and RTH2 spade connector locations
Remove the 4
mounting screws
Disconnect
RTH1
Disconnect
RTH2