Stratasys uPrint, Service Manual, Page: 88 / 383

uPrint/uPrint SE Service Manual 4-41
5.
Using a Phillips screwdriver, remove the 3 mounting screws. See Figure 4-69.
Figure 4-69: Line filter mounting screw locations
6.
Lift board and gently remove the line filter.
Installing the line filter
1.
Align the line filter with the mounting holes.
2.
Using a Phillips screwdriver, reinstall the 3 mounting screws.
3.
Reconnect the L2-1 and N2-1 spade connectors to the left side of the board.
4.
Reconnect the LF2-P and LF2-N spade connectors to the right side of the board.
5.
Close the electronics bay. See Closing the electronics bay on page 4-16.
Remove the 3 mounting screws