Stratasys uPrint, Service Manual, Page: 106 / 383

uPrint/uPrint SE Service Manual 4-59
Figure 4-95: Head cover tab locations
5.
Remove the air plenum by pressing in the upper and lower tabs and pulling outward.
See Figure 4-96.
Figure 4-96: Air plenum tab locations
6.
Disconnect the material tubes by pressing down on the retaining ring and lifting up the
material tubes. See Figure 4-97.
Press tab in to
release head
cover
Press tab in to
release head
cover
Press in tab to
release air
plenum
Press in tab
to release air
plenum
Press in tab
to release air
plenum
Press in tab
to release air
plenum