Stratasys uPrint, Service Manual, Page: 147 / 383

4-100
Y Motor
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
•
9
⁄
64
” allen wrench.
Hardware
• 10-32 x
3
⁄
8
” slotted screws (x11)
• 8-32 x
1
⁄
2
” socket head cap screws (x4)
Removing the Y motor
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Remove the upper electronics bay cover. See Removing the upper electronics bay cover
on page 4-17.
4.
Remove the left side access panel. See Figure 4-171.
Figure 4-171: Left side access panel mounting screw locations
5.
Disconnect the Y motor cable by pressing in on the tab and pulling upward. See Figure 4-
172.
Remove the 7
mounting screws.