Stratasys uPrint, Service Manual, Page: 342 / 383

uPrint/uPrint SE Service Manual 6-75
10.
mx
= move x
This command moves the head in the X axis.
Parameters:
Float Position:
This is the absolute position it moves to, in inches, when the command is sent from the
Console and in device units when the command is sent through the DPM.
Example: mx 3.0 (moves the X-Axis 3 inches away from the X-Home sensor)
112.
11.
my
= move y
This command moves the head in the y axis.
Parameters:
Float Position:
This is the absolute position it moves to, in inches, when the command is sent from the
Console and in device units when the command is sent through the DPM.
Example: my 3.0 (moves the Y-Axis 3 inches away from the Y-Home sensor)
113.
12.
cl
= chamber light
This command turns the chamber light on and off.
Example:
cl 1
Parameters:
114.
115.
13.
dl
= door latch
This command controls the door latch solenoid. The door latch can be opened or closed.
Example:
dl 1
Parameters:
116.
Command Description
cl 0
Turns the light off
cl 1
Turns the light on
Command Description
dl 0
Opens door latch
dl 1
Closes door latch
dl 2 Places controller in charge of door latch