Stratasys uPrint, Service Manual, Page: 198 / 383

uPrint/uPrint SE Service Manual 4-151
Figure 4-262: Loosen Z stage leadscrew mounting bracket set screws
9.
Turn the leadscrew counter clockwise until it is free of the motor. See Figure 4-263.
Figure 4-263: Remove the leadscrew
10.
Remove the 4 Z stage motor mounting screws with a
3
⁄
32
” allen wrench and remove the
motor. See Figure 4-264.
Figure 4-264: Removing the Z stage motor
Loosen set screws
on both sides of the
mounting bracket.
Remove the 4
mounting screws