Stratasys uPrint, Service Manual, Page: 170 / 383

uPrint/uPrint SE Service Manual 4-123
26.
Using a
5
⁄
32
” allen wrench, remove the right side rear Y guide rod mounting screws and
remove the right side Y guide rod. See Figure 4-215.
Figure 4-215: Right side rear Y guide rod mounting screw location
27.
Disconnect the Y Home sensor cable by pressing in on the tab and pulling outward. See
Figure 4-216.
Figure 4-216: Y EOT sensor wire connector location
28.
Using a
5
⁄
32
” allen wrench, remove the left side front Y guide rod mounting screw. See
Figure 4-217.
Figure 4-217: Left side front Y guide rod mounting screw location
29.
Using a
5
⁄
32
” allen wrench, remove the left side rear Y guide rod mounting screw. See
Figure 4-218.
Remove the right
rear Y guide rod
mounting screw
Disconnect the
Y Home cable
Remove the left
front Y guide rod
mounting screw