Stratasys uPrint, Service Manual, Page: 68 / 383

uPrint/uPrint SE Service Manual 4-21
Electronics Bay Cooling Fan
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
•
5
⁄
64
” allen wrench.
Hardware
• 6-32 x 1
½
” flat head cap screws (x4)
Removing the electronics bay cooling fan
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Open the Electronics Bay. See Opening the electronics bay on page 4-15.
4.
Touch the metal plate of the electronics bay cover to discharge any static electricity.
5.
Disconnect the P1 cable from the fan. See Figure 4-40.
Figure 4-40: Electronics bay cooling fan connector location
6.
Using a
5
⁄
64
” allen wrench, remove the 4 mounting screws. See Figure 4-41.
P1 Connector