Stratasys uPrint, Service Manual, Page: 133 / 383

4-86
Figure 4-147: Material tube and retaining ring locations
10.
Cut the wire tie from around the umbilical hose. See Figure 4-148.
Figure 4-148: Umbilical hose wire tie location
11.
Remove the energy chain mounting screws from the translator with a
5
⁄
32
” allen wrench.
See Figure 4-149.
Figure 4-149: Remove the energy chain mounting screws
12.
Straighten the energy chain and feed the umbilical hose through to remove.
Press down on
the retaining
rings
Lift the material
tubes out of the
rings
Cut and remove
the wire tie
Remove the 2
mounting screws