Stratasys uPrint, Service Manual, Page: 190 / 383

uPrint/uPrint SE Service Manual 4-143
Removing the left side heater
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 4 mounting screws and
remove the heater panel. See Figure 4-249.
Figure 4-249: Left side heater panel mounting screw locations
4.
Using a
3
⁄
8
” nut driver, remove the white power wire from the right mounting post. See
Figure 4-250.
5.
Using a
3
⁄
8
” nut driver, remove the black power wire from the left mounting post. See
Figure 4-250.
Figure 4-250: Power wire locations
6.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the left and right mounting
screws. Do not lose the insulating washers as they are need for reinstallation. See Figure
4-251.
Remove the 4
mounting screws
Remove the
black power wire
Remove the
white power wire