Stratasys uPrint, Service Manual, Page: 119 / 383

4-72
3.
Open chamber door and remove the head cover. See Figure 4-117.
Figure 4-117: Head cover tab locations
4.
Using a
7
⁄
64
” allen wrench, loosen but do not remove the 4 tip mounting screws. See
Figure 4-118.
Figure 4-118: Tip mounting screw locations
5.
Remove the tips by pulling them downwards. See Figure 4-119.
Figure 4-119: Removing the tips
6.
Using a
7
⁄
64
” allen wrench, loosen the 2 heat shield screws. See Figure 4-120.
Press tab in to
release head
cover
Press tab in to
release head
cover