Stratasys uPrint, Service Manual, Page: 132 / 383

uPrint/uPrint SE Service Manual 4-85
5.
Using a
1
⁄
4
” nut driver or standard screwdriver, loosen the umbilical hose clamp. See
Figure 4-144.
6.
Disconnect the umbilical hose from the head cooling fan and remove the hose clamp. See
Figure 4-144.
Figure 4-144: Umbilical hose clamp location
7.
Remove the head cover by pressing the tabs in and pulling outward. See Figure 4-145.
Figure 4-145: Head cover tab locations
8.
Remove the air plenum by pressing in on the tabs and pulling outward. See Figure 4-146.
Figure 4-146: Air plenum tab locations
9.
Disconnect the model and support material tubes. See Figure 4-147.
Loosen the clamp
screw and
disconnect the hose
Press in tab to
release head
cover
Press in tab
to release
head cover
Press in tab to
release air plenum
Press in tab to
release air plenum
Press in tab to
release air plenum
Press in tab to
release air plenum