Stratasys uPrint, Service Manual, Page: 291 / 383

6-24
Controller Initialization Failed Minor Errors (19.XX)
Door Unlatch Failed (20.XX)
Controller Communications Failed Sub Errors (22.XX)
Universal Device Name Error (23.XX)
49.
18,04 Incorrect support head tem-
perature.
1. Using MaracaEX, set support temperature to default of 300C.
18,05 Incorrect chamber tempera-
ture.
1. Using MaracaEX, set chamber temperature to default of 77C.
Code Description Corrective Actions
19,01 IN_COMMAND Rejected by
Controller.
Software use only
19,02 IN_COMMAND Time-out. 1. Cycle power.
2. Replace Controller Board.
3. Replace Hard Drive.
Code Description Corrective Actions
20,01 Unlatch command rejected.
20,02 Time-out period expired wait-
ing for head to stop.
1. Check door latch solenoid wiring.
2. Check ability of door to latch
Code Description Corrective Actions
22,01 FC_SERVICE event not
received.
22,02 Insufficient material to com-
plete job.
Not used on uPrint, uPrint SE, uPrint Plus and uPrint SE Plus printers.
Code Description Corrective Actions
23,01 UDN controller command
failed.
23,02 UDN controller command
timed out.
1.
Check network for connectivity.
2.
Cycle power.
Code Description Corrective Actions