Stratasys uPrint, Service Manual, Page: 142 / 383

uPrint/uPrint SE Service Manual 4-95
7.
Using a cutters, remove the X motor cable connector wire tie. See Figure 4-161.
Figure 4-161: X motor wire tie locations
8.
Disconnect the X motor cable by pressing in on the tab and pulling outward. See Figure
4-162.
Figure 4-162: X motor cable connector location
9.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 2 X energy chain mounting
bracket mounting screws. See Figure 4-163.
Cut and remove
wire tie
Disconnect X
motor cable