Stratasys uPrint, Service Manual, Page: 193 / 383

4-146
5.
Using a standard screwdriver, remove the 2 mounting screws. See Figure 4-254.
Figure 4-254: Right side thermal fuse mounting screw locations
6.
Remove the thermal fuse.
Installing the right side thermal fuse
1.
Align the thermal fuse with the mounting holes.
2.
Using a standard screwdriver, reinstall the mounting screws.
3.
Reconnect RTH1 and RTH2 spade connectors.
4.
Align the heater panel with the 4 mounting screws.
5.
Using a
5
⁄
16
” nut driver or standard screwdriver, reinstall the 4 mounting screws.
6.
Reinstall the side panels. See Installing the side panels on page 4-8.
7.
Reinstall the top panel. See Installing the top panel on page 4-6.
Removing the left side thermal fuse
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 4 mounting screws from the
left side heater panel and remove the heater panel. See Figure 4-255.
Figure 4-255: Left side heater panel mounting screw locations
4.
Disconnect the LTH1 and LTH2 spade connectors by pulling outward. See Figure 4-256.
Remove the
mounting screws
Remove the 4
mounting screws