Stratasys uPrint, Service Manual, Page: 55 / 383

4-8
Removing the right side panel
1.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 3 mounting screws. See
Figure 4-21.
Figure 4-21: Right side panel mounting screw locations
2.
Slide towards the back of the printer and pull outward to remove. See Figure 4-22.
Figure 4-22: Removing the right side panel
Installing the side panels
1.
Slide the left side panel towards the front of the printer and push into place.
2.
Using a
5
⁄
16
” nut driver or standard screwdriver, Reinstall the 3 mounting screws.
3.
Slide the right side panel towards the front of the printer and push into place.
4.
Using a
5
⁄
16
” nut driver or standard screwdriver, Reinstall the 3 mounting screws.
5.
Reinstall the top panel. See Installing the top panel on page 4-6.
Remove the 3 right
side panel
mounting screws.
Pull the right side panel
out and towards the
back of the printer to
remove.