Stratasys uPrint, Service Manual, Page: 91 / 383

4-44
AC Input
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
• Phillips screwdriver
Hardware
•
1
⁄
2
” x 6mm Phillips pan head screws (x2)
Removing the AC Input
1.
Open the electronics bay. See Opening the electronics bay on page 4-15.
2.
Touch the metal plate of the electronics bay cover to discharge any static electricity.
3.
Remove the LF-G (green) spade connector. See Figure 4-73.
4.
Remove the LF-N (white) spade connector. See Figure 4-73.
5.
Remove the LF-P (black) spade connector. See Figure 4-73.
Figure 4-73: AC input connection locations
6.
Using a Phillips screwdriver, remove the 2 mounting screws and remove the AC Input.
See Figure 4-74.
LF-N (white)
LF-P (black)
LF-G (green)