Stratasys uPrint, Service Manual, Page: 189 / 383

4-142
5.
Remove the white power wire from the left mounting post with a
3
⁄
8
” nut driver. See
Figure 4-247.
Figure 4-247: Power wire locations
6.
Remove the left and right mounting screws with a
5
⁄
16
” nut driver or standard
screwdriver. Do not lose the insulating washers as they are need for reinstallation. See
Figure 4-248.
Figure 4-248: Right side heater mounting screw locations
7.
Remove the heater.
Installing the right side heater
1.
Align the heater with the mounting posts.
2.
Insert the insulating washers and reinstall the mounting screws using a
5
⁄
16
” nut driver
or standard screwdriver.
3.
Reinstall the white power wire on the left mounting post using a
3
⁄
8
” nut driver.
4.
Reinstall the black power wire on the right mounting post using a
3
⁄
8
” nut driver.
5.
Align the heater panel with the mounting holes.
6.
Using a
5
⁄
16
” nut driver or standard screwdriver, reinstall the 4 heater panel mounting
screws.
7.
Install the side panels. See Installing the side panels on page 4-8.
8.
Install the top panel. See Installing the top panel on page 4-6.
Remove the
white power wire
Remove the black
power wire
Remove the
mounting screws