Stratasys uPrint, Service Manual, Page: 242 / 383

uPrint/uPrint SE Service Manual 5-33
Figure 5-342: Measuring diameter of circle D
21.
Add the lengths derived from steps 18 and 19 (A-D and D-G) and then subtract the width
of circle D derived from step 20 . Record this total as “Left”
22.
Measure and record the distance from the outside edge of circle G to the outside edge of
circle H. See Figure 5-343.
Figure 5-343: Measuring distances from outside edges of G and H
23.
Measure and record the distance from the outside edge of circle H to the outside edge of
circle I. See Figure 5-344.
Figure 5-344: Measuring distances from outside edges of H and I
24.
Measure and record the diameter of circle H along the center line between G and I. See
Figure 5-345.
Figure 5-345: Measuring diameter of circle H
25.
Add the lengths derived from steps 22 and 23 (G-H and H-I) and then subtract the width
of circle H derived from step 24 . Record this total as “Rear”
26.
Measure and record the distance from the outside edge of circle C to the outside edge of
circle E. See Figure 5-346.