Stratasys uPrint, Service Manual, Page: 197 / 383

4-150
Figure 4-260: Removing the Z stage panel
6.
Remove the 4 Z motor energy chain mounting screws with a
3
⁄
32
” allen wrench. See
Figure 4-261.
7.
Cut the tie wraps holding from around Z stage energy chain. See Figure 4-261.
Figure 4-261: Remove the Z motor energy chain
8.
Loosen but do not remove the Z stage leadscrew mounting bracket set screws using a
9
⁄
64
” allen wrench. See Figure 4-262.
Cut the
wire tie
Cut the
wire tie
Remove the 2
mounting screws
Remove the 2
mounting screws