Stratasys uPrint, Service Manual, Page: 243 / 383

5-34
Figure 5-346: Measuring distances from outside edges of C and E
27.
Measure and record the distance from the outside edge of circle E to the outside edge of
circle G. See Figure 5-347.
Figure 5-347: Measuring distances from outside edges of E and G
28.
Measure and record the diameter of circle E along the center line between C and G. See
Figure 5-348.
Figure 5-348: Measuring diameter of circle E
29.
Add the lengths derived from steps 26 and 27 (C-E and E-G) and then subtract the width
of circle E derived from step 28 . Record this total as “Left Rear”