Stratasys uPrint, Service Manual, Page: 82 / 383

uPrint/uPrint SE Service Manual 4-35
Figure 4-60: SATA cable location
5.
Using a Phillips screwdriver, remove the 4 mounting screws. See Figure 4-61.
Figure 4-61: Hard drive mounting screw locations
6.
Slide the hard drive up and out of the electronics bay.
7.
Using a Phillips screwdriver, remove the mounting brackets from the hard drive. See
Figure 4-62.
Figure 4-62: Hard drive mounting bracket screw locations
Disconnect the
SATA cable
Remove the
mounting screws
Remove the
mounting screws
Remove mounting
brackets