Stratasys uPrint, Service Manual, Page: 241 / 383

5-32
16.
Measure and record the diameter of circle F along the center line between C and I. See
Figure 5-339.
Figure 5-339: Measuring diameter of circle F
17.
Add the lengths derived from steps 14 and 15 (C-F and F-I) and then subtract the width
of circle F derived from step 16 . Record this total as “Right”
18.
Measure and record the distance from the outside edges of circles A and D. See Figure 5-
340.
Figure 5-340: Measuring distances from outside edges of A and D
19.
Measure and record the distance from the outside edges of circles D and G. See Figure 5-
341.
Figure 5-341: Measuring distances from outside edges of D and G
20.
Measure and record the diameter of circle D along the center line between A and G. See
Figure 5-342.