Stratasys uPrint, Service Manual, Page: 240 / 383

uPrint/uPrint SE Service Manual 5-31
Figure 5-335: Measuring distance from outside edges of A and B
12.
Next measure and record the distance from the outside edges of circle B and C, see Figure
5-336.
Figure 5-336: Measuring distance from outside edges of B and C
13.
Add the lengths derived from steps 11 and 12 (A-B and B-C) and then subtract the width
of circle B. Record this total as “Front”
14.
Measure and record the distance from the outside edges of circles C and F. Ensure the
caliper is not seated on the small bump of circle C. See Figure 5-337.
Figure 5-337: Measuring distances from outside edges of C and F
15.
Measure and record the distance from the outside edges of circles F and I. See Figure 5-
338.
Figure 5-338: Measuring distances from outside edges of F and I