Stratasys uPrint, Service Manual, Page: 2 / 383

ii
Notice
The information in this document is subject to change without notice.
STRATASYS, INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Stratasys, Inc. shall
not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
© 2012 Stratasys Inc. All rights reserved. Stratasys, Dimension, uPrint, Catalyst, FDM,
Dimension BST, Dimension SST, WaveWash, and Ecoworks are registered trademarks of
Stratasys Inc. FDM Technology, Fused Deposition Modeling, ABS plus, Catalyst EX, and
Smart Supports are trademarks of Stratasys, Inc. All other trademarks are the property of
their respective owners, and Stratasys assumes no responsibility with regard to the selection,
performance, or use of these non-Stratasys products. Product specifications are subject to
change without notice. Printed in the USA.
Stratasys, Incorporated
7665 Commerce Way
Eden Prairie, MN 55344 USA
Telephone: (952) 937-3000
Fax: (952) 937-0070
www.stratasys.com
Publication Date: July 2012